What is a Nuheat?

Nuheat is a clean soundless system that brings warmth to any space. Nuheat Floor Heating Systems provide radiant zone heating which is very energy efficient. Zone heating using a programmable thermostat, means heating room by room, use by use – heat only where you want, when you want it.

How do you turn on a Nuheat floor?

Turn the unit on by pressing the on/off button on the right side of the thermostat. Wait several seconds for the screen to turn on. There is no power going to thermostat. Press the GFCI test button at the top of the thermostat.

How do I reset my Nuheat solo thermostat?

Briefly press the Select button to return to the Programming Menu. To return the thermostat to its default settings, simultaneously press both the Select and Down buttons and hold. rSt (reset) will flash on the screen.

What temperature should Nuheat be set at?

Set according to your flooring type. When Engineered/Laminate is selected, the floor temperature will be limited to 82°F / 28°C.

What temperature should Nuheat be?

By default, the maximum set point of a NUHEAT thermostat is 40° C or 104° F; however, NUHEAT thermostats also have a setting that limits in-floor temperature to ensure safe use with laminate, engineered wood or luxury vinyl floors.

Does Nuheat require dedicated circuit?

Nuheat Cable should be connected to a dedicated electrical circuit. It is mandatory to install a Class “A” GFCI or GFCI circuit breaker with each Nuheat installation.

Can you cut Nuheat mats?

Subfloor must be prepared in accordance to ANSI specifications. Nuheat Mat cannot be overlapped, crossed, cut, shortened or modified.

How do you turn off the thermostat on a Nuheat home?

To place the thermostat in Off mode, press the Mode button until the message OFF appears on the screen. After 5 seconds, the message will disappear and current time and day will appear.

Can Nuheat cable be cut?

Nuheat Cable cannot be overlapped, crossed, cut, shortened or modified.