What is a 451 stroker Mopar?
The 451 is arguably the best BB Mopar engine combination available. The 451, which is made by dropping a 440 crank into a 400 block, has almost perfect design parameters.
How much horsepower does a Mopar 408 stroker have?
Best Use
| Horsepower: | 470 |
|---|---|
| Torque: | 450 |
| Bore/Stroke: | 4.030 x 4.000 |
| Compression: | 10:1 |
| Fuel Type: | 91+ AKI (USA) / 95-98 RON |
How much does it cost to build a 408 stroker Mopar?
A stroker kit will cost a thousand or better. Often a box stock overhaul with proper machine work will cost upwards of $3000 depending on what needs to be done. Crank and pistons make the stroker. Stock rods can be used.
Can you put a 440 crank in a 400 block?
The 451, which is made by dropping a 440 crank into a 400 block, has almost perfect design parameters. Deck Height: The 400 block, with a deck height of 9.980 is perfect for a 3.75 stroke since a 1.80 rod ratio yields a nice light compression height of 1.355.
When did the Chrysler 400 come out?
400. The 400 cu in (6.6 L) B engine was introduced in 1972 to replace the venerable 383, and were power-rated via the net (installed) method. Chrysler increased the bore size of the 383 to create the 400.
Who makes a 408 motor?
408 Ford Long Block The 408 Ford is an excellent choice for those looking for a Windsor based stroker engine to fit in place of an existing 351. The additional stroke provides a boost in power along with better throttle response, acceleration, and overall performance.
Who makes the 408 stroker?
408 Ford Stroker Crate Engine | Ford Performance Engine.
What is the stroke of a 360 Mopar?
The LA 360 cu in (5.9 L) has a bore and stroke of 4 in × 3.58 in (101.6 mm × 90.9 mm). It was released in 1971 with a two barrel carburetor.
Are 383 and 440 same block?
440 is wider/taller than a 383, since it is a Raised block, or RB. The 383 is a B block. It will bolt to everything the 44o does, except perhaps the motor mounts.