How do you bleed the brakes on a Corvette?
Tell the helper “DOWN” to push on the brake pedal, then open the bleeder and let the air and fluid drain. Close the bleeder and then, and only then, say “UP” to allow the pedal to come up. Repeat until no air bubbles are seen and the fluid is clear.
How do you bleed brakes with ABS module?
In general, whenever you are bleeding an ABS-equipped vehicle you can do so exactly as you would any other vehicle – stroke the pedal to pressurize the system, open a bleeder, close the same bleeder, and repeat. This does not change whether you are pressure-bleeding, vacuum-bleeding, or manual-bleeding.
How to bleed the brakes on a corvette?
Gravity can also do the job and actually works well on many Corvettes. A fourth method is applying a vacuum to the bleeder but it’s not as easy to see when all the air is out of the system because air can leak by the bleeder threads causing bubbles in the outgoing fluid. Let’s get going and see how to bleed the brakes.
Does brake fluid affect brake performance on the C6 and C7 Corvette?
This article applies to the C6 and C7 Corvette (2005-current). Keeping good, clean brake fluid in your braking system can greatly improve your braking performance. While those of you who only drive on the street may not notice a big difference, this can be the difference between making that turn and wrecking your car on the track.
Why do I need to flush the brakes on my Corvette?
Flushing the brakes on the Corvette is an important maintenance item. Learn how to bleed the system and replace brake fluid here. This article applies to the C6 and C7 Corvette (2005-current). Keeping good, clean brake fluid in your braking system can greatly improve your braking performance.
How to bleed brake fluid in a car?
Refill the reservoir with new brake fluid. Attach the silicon tube to each bleeder valve and route into the drain pan. Starting with the bleeder valve at the back of the car, open it until fluid starts to flow and then open the one in the front as well. Let it gravity bleed until the fluid begins to come out clear.