What does a 3208 Caterpillar weigh?
The 3208 is an eight-cylinder, four-stroke diesel engine with a V-8 configuration. It has a 114.3-millimeter bore and a 127-millimeter stroke. Different variations of the engine weigh between 722 and 899 kilograms.
How much oil does a Caterpillar 3208 engine hold?
Going by memory, 3208 (non-turbo) engines were 14-16 quarts, with new filters installed.
Is Cat 3208 a good engine?
The use of the engine was widespread and its performance was reliable. As a result, many vehicles equipped with the CAT 3208 remain in service long after production of the diesel engine ceased. Over its two-decade production run, the CAT 3208 diesel engine had three versions ranging in horsepower for heavy-duty trucks.
How much torque does a 3208 Caterpillar have?
CAT 3208 vs. CAT 3116/3126
| Feature comparison | CAT 3208 diesel engine |
|---|---|
| Production years | 1975 to 1993 |
| Horsepower | Minimum: 200 hp @ 2000 RPM Maximum: 235 hp @ 2600 RPM |
| Torque | Minimum: 620 lb-ft @ 1440 RPM Maximum: 640 lb-ft @ 1400 RPM |
How many cubic inches is a 3208 Caterpillar?
CAT 3208 Long Block Parts List:
| CAT 3126 Spec | Engine Data |
|---|---|
| Emissions | IMO Compliant |
| Bore | 114.3 mm (4.5 in) |
| Stroke | 127 mm (5.0 in) |
| Displacement | 10.4 L (636 cu in) |
How do I know what Caterpillar engine I have?
LOCATE YOUR CATERPILLAR ENGINE SERIAL NUMBER This information can be found on the engine data plate, located on the left side by the injection pump. Engine serial numbers are also stamped on the engine block. The serial number is usually 8 digits long. Pictured: engine data plate with a serial number of MSX81323.
What oil does a 3208 Cat take?
What type of oil should I use? The turbo 3208 requires CE grade oil. The most common CE oil is 15/40 weight. When the engine leaves the factory it has 10W/30 which is not a break-in oil and will perform to the regularly scheduled oil change.
How much oil does a CAT 3408 hold?
CAT 3408 Long Block Parts List:
| CAT 3408 Spec | Engine Data |
|---|---|
| Bore | 137.0 mm |
| CAPACITY FOR LIQUIDS | |
| Cooling System | 54.9 L |
| Lube Oil System | 46.2 L |
What kind of engine does a Caterpillar 3208 have?
The original caterpillar 3208 diesel engine was a 225hp, 636 cubic-inch capacity V8 design. It did not have cylinder liners, but many engineering companies would re-bore the blocks and fit oversize pistons and rings rather than throw the engines away.
What is the difference between a caterpillar 3160 and 3208?
When Caterpillar came out with the 3160’s successor, the 3208 , they improved the strength of the “bottom end”, but like the 3160 it still had the camshaft gear flaw. The original caterpillar 3208 diesel engine was a 225hp, 636 cubic-inch capacity V8 design.
How reliable is a 3208 engine?
Use of the engine was widespread and its performance was reliable; as a result, many 3208-equipped vehicles remain in service long after production of the engine ceased. The 3208 is an eight-cylinder, four-stroke diesel engine with a V-8 configuration. It has a 114.3-millimeter bore and a 127-millimeter stroke.
Can A 3208 cat engine be surgically implanted?
The most popular candidate to be surgically implanted a massive 3208 cat engine seems to be the Ford F-250 Super Duty. It is the ideal choice if an engine swap is to be concerned, barring the obvious Ford-Caterpillar connection.