How do I control led with iPad?

Open the Led Ble app. Turn on your Bluetooth, plug in the lights. Hit scan on the app and it should connect. Sometimes when it disconnects you just unplug the Led light and plug them back in.

What is a DMX controller?

The DMX light controller is the brain of any DMX system. It allows lighting fixtures to be controlled remotely from a playback, desk, or console. With DMX, you can daisy-chain one lighting or effects fixture to another in a series allowing you to control up to 512 channels, otherwise called a universe.

What is ArtNET DMX?

ArtNET is the perfect way to send and receive many DMX universes or to connect multiple lighting consoles together. Since it uses the network to transmit and receive data, no special DMX cable and converter are needed. You only need those when you want to send actual DMX values to your lighting fixtures.

What app can control any LED lights?

What is Lumenplay®? Lumenplay® is an extendable string of app-enabled RGB LED lights that enables you to create scenes of color and motion, all from your smart device. Use the free Lumenplay® app to setup a personalized light show by choosing color combinations, effects, speed, direction and brightness.

Can I use any app for my LED lights?

You can remotely control your led tape lights by your smartphone APP. You can also easily change brightness, color, mode, speed and as much as 16 colors.

What can DMX control?

DMX (Digital Multiplex) is a protocol used to control devices such as lights or fog machines. The signal is unidirectional, meaning it only travels in one direction; from the controller or first light, all the way to the last.

How do I connect LED Strip to DMX?

Making the connection:

  1. Cut off the connector at the end of the power supply and expose the copper wires.
  2. Connect your positive lead to the red strip at the end of your LED strip, and your negative lead with the black wire.
  3. Connect the 3-to-5 pin adapter to the NEO DMX interface output to your DMX LED Strip.

Do I need a DMX controller?

It is possible to connect a group of DMX fixtures without using a controller if you set them all to sound-active or automatic mode. Since they are all connected to each other, this will allow them to sync up to create an automatic light/effect show.