How do I pair my Fibaro smoke sensor?

Basic activation

  1. Turn the cover counter-clockwise and open it.
  2. Remove the battery blocker.
  3. Install the sensor’s cover in desired location.
  4. Screw the FIBARO Smoke Sensor into the cover.
  5. Add the device (see “Adding to the network”)
  6. Test FIBARO Smoke Sensor’s operation by performing a self-test – press & hold the B-button.

How do I reset my Fibaro smoke sensor?

Smoke Sensor – “Reset”

  1. Make sure the Sensor is powered.
  2. Press and hold the B-button.
  3. Wait for the visual indicator to glow white and short acoustic signal to sound.
  4. Release the B-button.
  5. Wait for the visual indicator to glow yellow (4th MENU position)
  6. Press the B-button again, briefly.

How do you test a Fibaro smoke sensor?

Malfunction detection

  1. Make sure the device is powered.
  2. Press and hold the B-button.
  3. The visual indicator will glow white and the short alarm will sound.
  4. Keep holding the B-button.
  5. After 3 seconds from the first beep smoke chamber operation will be checked.

How do you silence a fire alarm?

The smoke alarm is desensitized by pushing the “Test/Hush” button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. If the smoke or debris is interfering with the sensor, the alarm will override the Hush.

How do you use a smoke detector?

Install smoke alarms inside each bedroom, outside each sleeping area and on every level of the home, including the basement. On levels without bedrooms, install alarms in the living room (or den or family room) or near the stairway to the upper level, or in both locations.

How does a smoke detector sensor work?

Photoelectric alarms work using a photoelectric sensor and a light source. As smoke enters the chamber and crosses the path of the light beam, light is scattered by the smoke particles, aiming it toward the sensor, which in turn triggers the alarm.

Why is my smoke detector beeping?

Consistent Chirping If a smoke alarm is chirping consistently, one of the following may be the reason: The battery may need to be replaced. An alarm will chirp every 30 to 60 seconds for a minimum of seven days. With a “low battery” announcement, disconnect the unit and replace the batteries.

How does the Fibaro smoke detector work?

The FIBARO smoke detector in your home is a guard who watches over you around the clock, every day. When the Smoke Sensor detects danger, it instantly starts the alarm scene and immediately notifies you on your mobile device. Wherever you are, you have everything under control.

How does the smoke sensor work?

When the Smoke Sensor detects danger, it instantly starts the alarm scene and immediately notifies you on your mobile device. Wherever you are, you have everything under control. Combine Smoke Sensor with the FIABRO system which gives you the possibility to control the devices and manage the scenes in your smart home at any moment.

What is a Wireless smoke detector?

The Smoke Sensor is an ultralight, perfectly designed battery device that uses both photoelectric and temperature sensors for maximum protection from flaming and smoldering fires. Wireless smoke detector is a perfect choice for your smart home. See it in action.

Where should I place the smoke sensor?

Place the Smoke Sensor in vulnerable areas or anywhere you want to enhance the safety of your family. Adjust the sensitivity of the smoke detector for each room individually to make sure your house is safe. Place the Smoke Sensor in crucial areas and anywhere you want to enhance the safety of your family.

By