How do you change the cut plane in AutoCAD Architecture?
Then, select a display configuration in the left pane, and click the Cut Plane tab….To Set the Global Cut Plane and the Display Range.
| If you want to… | Then… |
|---|---|
| define the visible range above the cut plane | enter the appropriate value for Display Above Range. Note: The value you enter here is calculated from the WCS origin and is not relative to the cut height. |
What is a cut plane in architecture?
Drawing for Understanding, Creating Interpretive Drawings of Historic Buildings, published by Historic England in 2016 defines a cutting plane as: ‘The line of cut through the structure and spaces of a building, a horizontal cutting plane is used to produce a plan a vertical cutting plane is used to produce section …
How do I create a section in AutoCAD Architecture?
On the Tool Palettes, click (Properties), and click Document. Click the Callouts palette. Select a section callout tool. Alternatively, you can click Annotate tab Callouts panel Sections drop-down, and select one of the section tools.
How do you set a cut plane?
Click Manage tab Style & Display panel Display Manager . Select a display configuration that uses a Plan display representation in Top (plan) view or a 1 Line (for Duct domain only). Click the Cut Plane tab in the right pane. For Cut Height, enter a value for the cut plane.
What is global cut plane?
The global cut plane cuts all objects in a drawing at the same height. It is defined separately for each of the display configurations that can be applied to a drawing, so you can have, for example, one cut plane height for a regular plan view and another cut plane height for a Reflected view.
How do you cut a plane line?
Cutting plane lines are used to define section views.
- Choose Home tab→Drawing Views group→Cutting Plane .
- Click a part view.
- Draw the cutting plane.
- When you are finished drawing the cutting plane, on the ribbon, click Close Cutting Plane .
- Click to define the section view direction.
What is Section plane command in AutoCAD?
Creates a section object that acts as a cutting plane through 3D objects, and point clouds. Find. Section plane objects create sections of 3D solids, surfaces, meshes, and point clouds.
How is cutting plane represented?
A cutting plane is represented on a drawing by a cutting plane line. This is a heavy long-short-short-long kind of line terminated with arrows. The arrows in show the direction of view. Once again, here is an graphic example of a cutting plane line and the section that develops from it.
What do you mean by cutting plane?
In mathematical optimization, the cutting-plane method is any of a variety of optimization methods that iteratively refine a feasible set or objective function by means of linear inequalities, termed cuts.
How to use cut plane in AutoCAD?
click the value for Cut Plane on the status bar. Note: Specify a cut plane that falls within the display range, or change the value of the display range to include the cut plane height. click . Then, select a display configuration in the left pane, and click the Cut Plane tab.
How do I change the cut height of a cut plane?
Note: Specify a cut plane that falls within the display range, or change the value of the display range to include the cut plane height. click Manage tab Style & Display panelDisplay Manager. If you want to… Then… enter the appropriate value for Cut Height. enter the appropriate value for Display Above Range.
How do I access the global cut plane controls?
Access the global cut plane controls using one of the following methods. If you want to… Then… click the value for Cut Plane on the status bar. Note: Specify a cut plane that falls within the display range, or change the value of the display range to include the cut plane height.