How do you reset AEG Lavatherm tumble dryer?

You may be able to fix the problem by resetting the washing machine. To do this, remove the plug from the socket, wait 3 minutes and then plug it in again.

How do I clean the filter on my AEG Lavatherm dryer?

  1. Open the door. Pull the filter up.
  2. Push the hook to open the filter.
  3. Use a moist hand to clean both parts of the filter.
  4. If necessary, clean the filter with a vacuum cleaner. Close the filter.
  5. If necessary, remove fluff from the filter socket and gasket.

Why does my condenser dryer keep stopping?

The simplest reason that condensation dryers stop mid-cycle is that the condensation tray is full. This tray needs to be emptied, ideally after each use, so it doesn’t overflow. If this is imminent, your dryer will trigger a safety mechanism that shuts off the appliance.

How do you deep clean a tumble dryer?

How to Clean your Tumble Dryer

  1. Turn off power supply.
  2. Clean around the drum area and in the crevices, using a stainless-steel cleaner.
  3. Remove the lint filter, brushing off accumulated fluff with your fingers.
  4. Vacuum the lint filter area, using a narrow attachment to get at loose fluff, dust and hair.
  5. Check your vent.

How do you fix a dryer that keeps shutting off?

Here’s how it’s done:

  1. Disconnect the power.
  2. Open the dryer door and remove from its hinges.
  3. Remove all screws going around the door to take it apart.
  4. Take the two door halves apart.
  5. Use pliers to remove the door latch.
  6. Install the new door latch.
  7. Reassemble the dryer door.
  8. Remove the old door catch and replace with the new one.

Where can I get an engineer to repair my AEG tumble dryer?

Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London. The error E60 is related to a heating problem. This problem can be caused by insufficient ventilation in the room.

What does E20 mean on my AEG tumble dryer?

We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. There is the error message “E20” in the display of my dryer. E20 (or 2 beeps as an acoustic alarm in some models) indicates a water drainage or pump problem.

Why is my AEG tumble dryer displaying error C6?

We offer fixed price AEG Tumble Dryer Repairs in London. There is the error message “C6” in the display of my Dryer. There is a problem with the moisture sensor. The programme has taken longer than normal, longer than 4.5 hours. Check that the appliance is connected to a mains socket with safety earth.

How do I arrange for an AEG engineer to fix my appliance?

We’ll arrange for an AEG engineer near you to call in and fix your appliance, at a time that’s suitable for you. Book online or give us a call on 0208 226 3633. (London Only – Coverage Area)