How do you reset the drum on a Brother HL 5250DN?

When a new drum is inserted into a Brother HL-5250DN, you must reset the drum counter.

  1. Step 1: Open the front door.
  2. Step 2: Remove the drum unit.
  3. Step 3: Press the Go button until all the lights are amber.
  4. Step 4: Release the Go button.
  5. Step 5: Insert new drum unit.
  6. Step 6: Close the front door.

How do you reset the drum on a Brother HL 5340D?

7 Press and hold down the Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. ! IMPORTANT Do not reset the drum counter when you only replace the toner cartridge.

How do you reset the drum on a Brother printer HL l2360dw?

FAQs & Troubleshooting

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display Drum Unit, and then press OK.
  4. Press the Up arrow key to display Reset and reset the drum counter.
  5. Close the front cover.

How do I reset my brother hl 5350dn printer?

Make sure that all the LEDs are off. Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The printer will restart.

How do you reset the drum counter on a brother hl-5250dn?

How to: Reset the drum counter on Brother HL-5250DN. Step 1: Open the front door. Step 2: Remove the drum unit. Step 3: Press the Go button until all the lights are amber. Step 4: Release the Go button. Step 5: Insert new drum unit.

How do I reset the drum counter?

Open the front cover. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover.

How do I reset the counter on my brother hl-2130?

To reset the counter on your HL-2130, HL-2132, HL-2135W, HL-2240D, HL-2242D, HL-2250DN and HL-2270DW series printers: Turn on the printer (assuming it is not already on). Open the front cover. Press and hold the GO button for 4 seconds or until all the LED’s light up.

How do I reset the LED indicator lights on my Device?

Close front cover and make sure power cord is plugged in. Hold down Go button while turning on power switch. Keep Go button pressed down until only Toner, Drum and Paper LED indicator lights are lit up.