How do I program a Uniden scanner?

How to Program a Uniden Bearcat BC350A Scanner

  1. Press “Hold” when the scanner stops on a frequency you want to store. Watch for the “HOLD” icon on the screen.
  2. Press “PROG” to enter the programming mode.
  3. Press “PROG” to exit the programming mode once you have stored all of the frequencies you want to save.

How do I program my Uniden BC147XLT scanner?

How to Program a Bearcat BC147XLT Scanner

  1. Turn the scanner on. Video of the Day.
  2. Press the “Manual” button. This will cause the unit to cease its scan.
  3. Press the channel number that you are programming then press “Manual” again.
  4. Enter the frequency that you wish to program using the numeric keypad.
  5. Press the “E” button.

How do you program a Uniden Bearcat BC148XLT scanner?

How do I Program a Bearcat BC148XLT Scanner?

  1. Press “Manual” to stop the scanning process. Press the number for the channel you want to program using the keypad on the scanner base.
  2. Enter the frequency, including the decimals, using the buttons on the keypad.
  3. Press “E” to store the frequency. references.

How do I unlock my Uniden Bearcat scanner?

Uniden Bearcat BC125AT Handheld Scanner, 500-Alpha-Tagged Channels, Close Call Technology, PC……

  1. Press Hold to stop scanning.
  2. Press and hold L/O until “Confirm Unlock All Channels?” appears in the display.
  3. Press Pgm/E to unlock all or .Clr to cancel.

How do you program a Uniden Bearcat scanner frequencies?

Programming a Handheld Model of the Uniden Bearcat Scanner

  1. Ensure the battery is fully charged, or plug in the AC adapter.
  2. Press the “Scan” button to put the handheld into scanning mode and press “Manual” to enter manual programming mode.
  3. Enter the frequency you wish to store, using the numeric keypad.

How do you unlock a scanner?

Unlock the Scanner:

  1. Locate the colored lever on the bottom of the Scanner unit. There is a lock and unlock icon. If the lever is towards the back of the copier / printer, the Scanner is locked.
  2. Slide the colored lever towards the front of the copier / printer, to the unlocked position.

Why does my scanner say lockout?

“If this is the first time you have turned on the scanner, All LocOut displays. This means that no frequencies have been saved into channels.